What will you do when you find there is no satellite appearing on the remote controller?

Please confirm the detail status of your drone.

A There is nothing on your remote.

B The positioning accuracy in the upper right corner has always been 0.

For A: The OSD returning cable of the receiving set is loose or GPS is disconnected from flight control.

(1) The OSD returning cable of the receiving set , please refer to the green wire in the picture. If the wire is loose, the date on the remote controller won't change. You can estimate it by moving the aircraft, if there isn't change, you can confirm the green wire is loose.

(2) GPS is disconnected from flight control.

It is corroded where the flight control is connected to the GPS,or the GPS is damaged.For this status,it can only be repaired.

For B: Please switch your drone to GPS mode. Then unlock your drone.

(1) If you can unlock your drone, at this time the prompt of your controller is no GPS. You can conform the GPS or the connection between the GPS and flight control.

(2) If you can unlock your drone, and the positioning accuracy in the upper right corner still is 0.You can confirm the green wire is loose.