When you get the prompt like pushing all switches up, please calibrate the controller as below method.
(1) Power off the aircraft.
(2) Press and hold the function button and the gimbal down button for 3 seconds.
The remote controller would start to beep and prompt for calibration.
(3) Push both sticks all the way up and rotate about 5 circles, then release both control sticks, the remote controller will beep and indicate the calibration is complete.
⚠If the calibration is not successful, the remote controller will keep beeping. Please repeat step
⚠ While calibrating, move the control sticks gently. Avoid moving abruptly.