How to update FD1 firmware

Andre Holzendorf

• July 18, 2022 23:09

Can someone walk me through updating the firmware for my Swellpro FD1 fisherman's drone

0

• 

  Don Lukasek

  • August 01, 2022 01:34

  Great question!!  As I too could not find a procedure.  Here is what I find after contacting support.  It worked for me.

  1.) Download firmware and install tool.

  2.) Open install tool, select update (mine was in slot 2, based on support feedback).

  3.) With batter installed and USB connected to computer, push power button (and hold until update is complete).

  4.) Note, install tool button to install patch is available.  Push install, the installation shows percent complete.

  5.) Release power button and disconnect USB cable from drone.

  6.) I did a low level flight test to confirm working drone.

   

  Good Luck!  

  1

Please sign in to leave a comment.